Tripp Lite Switch NETDIRECTOR User Manual

0

Out of 0 Ratings

Owner's of the Tripp Lite Switch NETDIRECTOR gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 72
 
21
The OSD Main Page
Video Options (continued)
Gamma Adjustment
The settings in the Video Options screen are given in the table below:
Action Description
Screen Position Adjust the horizontal and vertical position of the remote computer window by clicking the Arrow buttons.
Auto-Sync Click Auto-Sync to have the vertical and horizontal offset values of the remote screen automatically detected and
synchronized with the local screen.
Note: If the local and remote mouse pointers are out of sync, in most cases, performing this function will bring them
back into sync. This function works best with a bright screen. If you are not satisfied with the results, use the Screen
Position arrows to position the remote display manually.
RGB Drag the slider bars to adjust the RGB (Red, Green, Blue) values. When an RGB value is increased, the RGB
component of the image is correspondingly increased. If you enable Set to Grayscale, the remote video display is
changed to grayscale. Setting the video to display in grayscale will decrease the amount of data traveling through the
network and improve keyboard and mouse response time.
Gamma This setting allows you to adjust the video display’s gamma level. This function is discussed in detail in the next section,
Gamma Adjustment.
Video Quality Drag the slider bar to adjust the overall video quality. Although a higher video quality setting improves the overall video,
it also increases the amount of data traveling through the network. Higher settings may slow keyboard and mouse
response time.
Enable Refresh The B064-series KVM Switch can be set to redraw the screen every 1 to 99 seconds, eliminating unwanted artifacts
from the screen. Select Enable Refresh and enter a number from 1 through 99. The KVM Switch will redraw the screen
at the interval you specify. This feature is disabled by default. Click to put a check mark in the box next to Enable
Refresh to enable this feature.
Transparency Adjusts the transparency of the Control Panel. Slide the bar until the display in the example window is to your liking.
Color Depth Control This setting adjusts the amount of color information for the video data sent over the network. The richer the color, the
greater the data. For slow data connections, drag the slider bar to a lower setting to decrease the amount of video data
transferred. This ensures screen refreshing at workable speeds.
Note: For this feature to take affect, you must check the Enable check box next to the Color Depth Control bar.
Detect Tolerance This setting sets a threshold for filtering out undesired screen artifacts. Note: Setting the threshold too high may filter out
desired screen changes. Setting the threshold too low may allow unwanted artifacts to display, in addition to increasing
the amount of video data transmitted over the network.
If it is necessary to correct the gamma level for the remote video
display, use the Gamma function of the Video Adjustment dialog box.
• UnderBasicconguration,therearetenpresetandfouruser-
defined levels to choose from. Go through the options in the drop-
down list box to find a setting that works for you.
• Forgreatercontrol,clickingtheAdvanced button brings up the
following dialog box:
• Clickanddragthediagonallineatasmanypointsasyouwishto
achieve the display output you desire.
• ClickSave As to save up to four user-defined configurations derived
from this method. Saved configurations can be recalled from the
list box at a future time.
• ClickReset to abandon any changes and return the gamma line to
its original diagonal position.
• ClickOK to save your changes and close the dialog box.
• ClickCancel to abandon your changes and close the dialog box.
Note: For best results, change the gamma while viewing a remote
computer.

   Find Your Products By Category