Unisar Baby Monitor AC401-2P User Manual

0

Out of 0 Ratings

Owner's of the Unisar Baby Monitor AC401-2P gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 48
 
• Movement & Tic. The Movement Sensor is enabled and detects your
baby’s movements. You will also hear a ticking sound from the Nursery
Unit as the Sensor Pad senses your baby’s movement. Your baby’s
sounds, the movement alarm, and the ticking will not be transmitted to
the Parents’ Unit. For this setting, the Movement and “Tic” symbols will
appear (see fig. 16).
Once you have completed your selections, press the Menu button to change
another feature setting or press the Exit button to end programming.
Out-of-Range Indicator (See fig. 17)
The Out-of-Range Indicator will alert you when the Parents’ Unit and the
Nursery Unit are not in communication with each other. This may occur
when the units are too far from each other, if the Parents’ Unit is on when
the Nursery Unit is off, or if the units have lost communication with
each other. The Out-of-Range symbol will flash on the Parents’ Unit and
you will hear two beeps every eight seconds.
To turn this feature on or off:
1. Press the Menu button until the Out-of-Range symbol appears.
2. “ ” or “ ” will appear below. Use the Arrow buttons to make your selection.
3. Press the Select button.
4. Press the Menu button to change another feature setting or press the Exit
button to end programming.
Voice Activation (See fig. 18)
Voice Activation eliminates the background “hum” associated with sound
monitors when there is no significant sound being transmitted from
your baby’s room. It does this by automatically placing both the Nursery
Unit and Parents’ Unit in a “standby” mode. When sound is detected,
the Voice Activation automatically returns both units to an active mode
and immediately transmits the alarm or your baby’s sounds to you.
To use this feature:
1. Press the Menu button until the Voice Activation symbol appears.
2. “ ” or “ ” will appear. Use the Arrow buttons to make your selection.
3. Press the Select button.
4. If you choose to turn Voice Activation on, press the Menu button and then use the
Arrow buttons to choose the level of sensitivity. If you want to hear the slightest sound
in the nursery, adjust the sensitivity to the maximum level (4). If you only want to hear
when the baby cries loudly, adjust the sensitivity to lowest level (1). You may have
to adjust the sensitivity level a couple of times until you get the exact level you want.
NOTE: The movement alarm will be picked up at all levels of sensitivity.
5. Press the Select button when the desired level is displayed.
6. Press the Menu button to change another feature setting or press the Exit button to
end programming.
fig. 16
fig. 17
fig. 18
9
OF
OF

   Find Your Products By Category