Garmin Marine GPS System GPSMAP User Manual

0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 132
 
76 GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
Enabling Timed Transmit
From the Home screen, select Radar > Sentry > Menu > Sentry Setup > Timed Xmit > On.
Setting the Standby and Transmit Times
You must enable timed transmit before you can set the standby and transmit times (page 76).
To help conserve power, you can indicate the radar standby time and the transmit time to implement
periodic radar signal transmissions at set intervals.
1. From the Home screen, select
Radar > Sentry > Menu > Sentry Setup.
2. Select
Stdby Time.
3. Enter the time interval between radar signal transmissions:
For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad.
For the GPSMAP 7000 series, use the on-screen keyboard.
4. Select
Done.
5. Select
Xmit Time.
6. Enter the length of each radar signal transmission:
For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad.
For the GPSMAP 7000 series, use the on-screen keyboard.
7. Select
Done.
Enabling a Guard Zone
From the Home screen, select Radar > Sentry > Menu > Sentry Setup > Enable Guard Zone.
Dening a Partial Guard Zone
You must enable a guard zone before you can dene the boundaries of the zone (page 76).
You can dene the boundaries of a guard zone that does not completely
encompass your boat.
1. From the Home screen, select
Radar > Sentry > Menu > Sentry Setup >
Adjust Guard Zone > Move Guard Zone > Corner 1.
2. Adjust the location of the guard-zone corner:
For the GPSMAP 6000 series, use the Rocker and the on-screen arrows
( and ).
For the GPSMAP 7000 series, touch the guard-zone corner and drag.
3. Select
Corner 2 and repeat step 2 to adjust the location of the second
corner of the guard zone.
4. Select
Done.
Dening a Circular Guard Zone
You must enable a guard zone before you can dene the boundaries of the zone (page 76).
You can dene a circular guard zone that completely encompasses your boat.
1. From the Home screen, select
Radar > Sentry > Menu > Sentry Setup > Adjust Guard Zone
> Move Guard Zone > Circle.
2. Select
Menu > Sentry Setup > Adjust Guard Zone > Move Guard Zone > Corner 1.
•
•
•
•
•
•
Corner 1
Corner 2

   Find Your Products By Category