Garmin Marine GPS System GPSMAP User Manual

0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 132
 
GPSMAP
®
6000/7000 Series Owner’s Manual 55
Almanac, Environmental, and On-boat Data
Viewing Video
The chartplotter can show video if you are connected to one or more video sources using the
supplied video cable. A GPSMAP 7015 or 7215 chartplotter can also display real-time data from a
PC if the chartplotter is connected to the PC through the VGA input port (page 2). See the GPSMAP
6000/7000 Series Installation Instructions for details.
From the Home screen, select Information > Video.
Selecting a Video Source
1. From the Home screen, select Information > Video > Menu.
2. Select
Source.
3. Indicate the source of the video feed:
For the GPSMAP 6008, 6208, 6012, 6212, 7012, or 7212, select Video 1 or Video 2 to display
video input. For the GPSMAP 7015 or 7215, select Video 1, Video 2, Video 3, or Video 4.
For the GPSMAP 7015 or 7215, select S-Video if you are using an S-Video connector.
For the GPSMAP 7015 or 7215, select VGA Input to display real-time data from a PC. The
chartplotter display mimics the appearance of a computer monitor, and does not contain
Home, Mark, or Menu buttons.
For the GPSMAP 7015 or 7215, select Quad Video to display four RCA video inputs
simultaneously.
Conguring the Video Appearance
Before you can congure the video appearance, you must set the video Source setting to S-Video,
Video 1, Video 2, Video 3, Video 4, or Quad Video (page 55).
1. From the Home screen, select
Information > Video > Menu.
2. Complete an action:
Select Aspect > Stretch to show the video using a stretched aspect ratio. The video cannot be
stretched beyond the dimensions provided by the connected video device, and it may not ll
the entire screen.
Select Aspect > Standard to show the video using a standard aspect ratio.
Select Brightness. Select Up, Down, or Auto.
Select Saturation to adjust the color saturation. Select Up, Down, or Auto.
Select Contrast. Select Up, Down, or Auto.
Select Standard. Select the source format of the video (PAL or NTSC). Select Auto to allow
the chartplotter to select the source format automatically.
Alternating Among Multiple Video Sources
If you have two or more video sources, you can alternate between them using a specic time
interval.
1. From the Home screen, select
Information > Video > Menu > Source > Alternate
2. Select the amount of time each video appears.
•
•
•
•
•
•
•
•
•
•

   Find Your Products By Category