3.6

Out of 1 Ratings

Owner's of the Alpine Car Stereo System In-Dash GPS Navigation Receiver gave it a score of 3.6 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    4.0 out of 5
  • Maintenance

    1.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    4.0 out of 5
of 101
 
75-EN
A USB memory or Portable audio player can be connected to the
INA-W900 through the USB Connector of this unit.
If a USB memory device or Portable audio player is connected to the
unit, MP3/WMA/AAC files of USB memory and MP3/WMA files of
Portable audio player can be played back.
BANK Function (USB memory only)
What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
“Banking” refers to the action of building up a bank (of songs)
from the songs available in USB memory.
About Banking
While a bank is being built up, “BANKING” is displayed. If
another bank is selected when unit power is turned on, the ACC
position is set, or USB connection is made, banking will start.
It can take anywhere from a few seconds to up to 10 minutes for
banking to complete. This depends on the number of files and
folders in USB memory.
Available operations while Banking
Search functions, such as album search or tag information
(artist display, etc.) are available during the banking process.
However, during such time, tag information display changes.
Regular fast-forwarding and next song selection is available.
During Banking, the played back song order may differ from
the song order in USB memory.
This unit has the BANK function that automatically divides every 1,000
songs stored in USB memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one
bank can be stored according to the order stored in USB memory. A
maximum of 10 banks (10,000 songs) can be recognized. BANK1
(songs 1 to 1,000) is set as the default. If you want to search beyond
1,000 songs, perform the following operation to select a different bank.
1
Touch [P1/2] to change the function guide.
2
Touch BANK [ ] or [ ] to select the desired
BANK.
Each operation can be performed in the selected bank.
Even if the files are contained in the same folder, they may be saved
as different BANK.
Playback
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [USB Audio].
The USB mode is activated and the display changes to the
USB screen.
3
Touch [ ] or [ ] to select the desired track
(file).
Returning to the beginning of the current track (file):
Touch [ ].
Fast backward (Only for USB memory):
Touch and hold [ ].
Advancing to the beginning of the next track (file):
Touch [ ].
Fast forward (Only for USB memory):
Touch and hold [ ].
4
To pause playback, touch [ / ].
Touching [ / ] again will resume playback.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
If there is tag information, artist name/album name/track name is
displayed.
ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
“NO SUPPORT” is scroll displayed when text information is not
compatible with this unit.
Before disconnecting USB memory, be sure to change to another
source or set to pause.
Repeat Play
Only Repeat One is available for this mode.
Repeat One: A single song is repeatedly played back.
1
Touch [P1/2].
The function guide is displayed.
2
Touch [ ].
The file will be played repeatedly.
3
To cancel repeat play, touch [ ].
USB Memory
(Optional)
BANK No. Song number
BANK1 1~1,000
BANK2 1,001~2,000
...
...
BANK10 9,001~10,000
(off)
(Repeat One) (Repeat the list being
played back)