Alpine Car Stereo System In-Dash GPS Navigation Receiver User Manual

3.6

Out of 1 Ratings

Owner's of the Alpine Car Stereo System In-Dash GPS Navigation Receiver gave it a score of 3.6 out of 5. Here's how the scores stacked up:

  • Reliability

    5.0 out of 5

  • Durability

    4.0 out of 5

  • Maintenance

    1.0 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    4.0 out of 5
of 101
 
51-EN
The visual setting of Bright, color, contrast, etc. can be adjusted in this
mode.
Setting item: Visual EQ
Further setting items:
Visual EQ* Bright Color* Tint* Contrast
Sharp* User Memory*
* The setting is unavailable in navigation mode.
Touch [ ] or [ ] etc., of the desired item to change its
setting.
• The settings are available in the visual source mode only.
• The further setting items can be changed by touching [ ]/[ ].
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc through the screen displayed.
Selecting the Visual EQ Mode (Factory’s setting)
You can select a mode suitable for the subject image.
Further setting item: Visual EQ
Setting contents: OFF (FLAT) / Night M. / Soft / Sharp / Contrast /
P-1 / P-2
• To return to the default video settings, set this function to OFF. Any
Visual EQ selection or changes made are reset their initial settings.
• If any adjustments are made to the existing Visual EQ selections
(Night M., etc.), “Custom” is displayed.
Adjusting Brightness
Further setting item: Bright
Setting content: -15 ~ +15
You can adjust the brightness between Min (-15) and Max (+15).
When it reaches the minimum or maximum point, the display
shows “Min” or “Max” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as AUTO is set in
“Setting the Brightness of the Backlighting”
(page 51).
Adjusting Color of Picture
Further setting item: Color
Setting content: -15 ~ +15
You can adjust the color between Min (-15) and Max (+15).
When it reaches the minimum or maximum point, the display
shows “Min” or “Max” respectively.
• Color adjustment can be made only in DVD and AUX modes.
Adjusting Tint of Picture
Further setting item: Tint
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G Max” or “R Max” is
displayed at the maximum of each color.
• Tint adjustment can be made only in DVD and AUX modes.
• When setting PAL, you can not adjust the TINT.
Adjusting Image Contrast
Further setting item: Contrast
Setting content: -15 to +15
Contrast adjustment range is -15 to +15. “Low” and “High”
appear as the minimum and maximum values specified.
Adjusting Picture Quality
Further setting item: Sharp
Setting content: -15 to +15
Picture quality adjustment range is -15 to +15. “Soft” and “Hard”
appear as the minimum and maximum values specified.
• Picture quality adjustment can be made only in DVD and AUX
modes.
Storing Visual EQ
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, Picture Quality and Contrast.”
Further setting item: User Memory
Setting contents: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast” (
page 51), touch [ ] or [ ]
of User Memory and then select preset No.
“P-1” or “P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [Memory].
The adjusted Visual EQ mode is stored by the above
operations.
• You can recall the Visual EQ mode stored here from P-1 or P-2 of
“Selecting the Visual EQ Mode (Factory’s setting)” (page 51).
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: OFF / ON / Auto
• When ON or Auto is set, the setting is also applied for the button
lighting in
“Adjusting the Dimmer of Button Lighting at Night”
(page 53).
Visual EQ Setting Operation
OFF (FLAT): Initial Setting
Night M.: Suitable for movies in which dark scenes
frequently appear.
Soft: Suitable for CGs and animated films.
Sharp: Suitable for old movies where images are not
clearly shown.
Contrast: Suitable for recent movies.
P-1: Recalls the Visual EQ mode being stored on
preset No.P-1 from
“Storing Visual EQ” (page 51).
P-2: Recalls the Visual EQ mode being saved on
preset No.P-2 from
“Storing Visual EQ” (page 51).
Setting the Brightness of the Backlighting
OFF: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
ON: Keep the background illumination of the monitor dark.
Auto: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.

   Find Your Products By Category