Alpine Car Stereo System CDE-9874 User Manual

4.1

Out of 21 Ratings

Owner's of the Alpine Car Stereo System CDE-9874 gave it a score of 4.1 out of 5. Here's how the scores stacked up:

  • Reliability

    4.29 out of 5

  • Durability

    4.29 out of 5

  • Maintenance

    4.1 out of 5

  • Performance

    4.29 out of 5

  • Ease of Use

    3.71 out of 5
of 89
 
6-EN
CDE-9874
CDE-9872
Accessory List
• Head unit ............................................................................1
• Power cable........................................................................1
• Mounting sleeve.................................................................1
• Carrying case.....................................................................1
• Bracket key.........................................................................2
• Screw (M5 × 8)....................................................................4
• Owner’s Manual .......................................................... 1 set
Turning Power On and Off
Press SOURCE/ to turn on the unit.
• The unit can be turned on by pressing any other button except and
(Release).
Press and hold SOURCE/ for at least 2 seconds to
turn off the unit.
• The first time power is turned on, the volume will start from level 12.
Detaching and Attaching the Front Panel
Detaching
1
Turn off the unit power.
2
Press (Release) at the lower left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it
may result in malfunction.
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press RESET with a ballpoint pen or similar pointed
object.
Adjusting Volume
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) until the desired sound is
obtained.
Getting Started
SOURCE/
(Release)
/
MUTE
Rotary encoder
//ENT
SOUND/SETUP
(Release)
/
AUDIO
//ENT
MUTE/SETUP
SOURCE/
1
RESET switch

   Find Your Products By Category