Alpine Car Stereo System CDA-7863 User Manual

4.4

Out of 12 Ratings

Owner's of the Alpine Car Stereo System CDA-7863 gave it a score of 4.4 out of 5. Here's how the scores stacked up:

  • Reliability

    4.5 out of 5

  • Durability

    4.42 out of 5

  • Maintenance

    4.17 out of 5

  • Performance

    4.42 out of 5

  • Ease of Use

    4.25 out of 5
of 28
 
21-EN
Specifications
FM TUNER SECTION
Tuning Range 87.7 – 107.9 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 80 dB
Stereo Separation 45 dB
Capture Ratio 2.0 dB
AM TUNER SECTION
Tuning Range 530 – 1,710 kHz
Sensitivity (IEC Standard) 22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
REMOTE CONTROL
(CDA-7965/CDA-7864/CDA-7863 only)
Battery Type AAA batteries (2 pcs.)
REMOTE CONTROL SIZE
(CDA-7965/CDA-7864/CDA-7863 only)
Width 56 mm (2-1/4")
Height 14 mm (9/16")
Depth 105 mm (4-1/8")
Weight 50 g (1.8 oz)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Maximum Power Output 60 W × 4 (CDA-7864/
CDA-7863 only)
45 W × 4 (CDA-7862 only)
Maximum Pre-Output Voltage 4V/10 k ohms
(CDA-7965 only)
5V/10 k ohms
(CDA-7864/CDA-7863 only)
2V/10 k ohms
(CDA-7862 only)
Bass ±14 dB at 60 Hz
Treble ±14 dB at 10 kHz
Weight 1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 155 mm (6-1/8")
NOSEPIECE SIZE
Width 170 mm (6–3/4")
Height 46 mm (1-13/16")
Depth 19 mm (3/4")
Due to continuous product improvement, specifications and
design are subject to change without notice.
HI TEMP
ERROR - 01
Indication for CD Changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function.
When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
ERROR - 02
NO MAGZN
NO DISC

   Find Your Products By Category