Alpine Car Stereo System CDA-7863 User Manual

4.4

Out of 12 Ratings

Owner's of the Alpine Car Stereo System CDA-7863 gave it a score of 4.4 out of 5. Here's how the scores stacked up:

  • Reliability

    4.5 out of 5

  • Durability

    4.42 out of 5

  • Maintenance

    4.17 out of 5

  • Performance

    4.42 out of 5

  • Ease of Use

    4.25 out of 5
of 28
 
13-EN
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the station
frequency on the display blinks.
3 Press the Preset button into which you wish to
store the station while the frequency display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a triangle (9) and station
frequency memorized.
4 Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM and D.A.P.).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Automatic Memory of Station
Presets
1 Press the SOURCE button to select the radio
mode.
2 Press the BAND button repeatedly until the
desired radio band is displayed.
3 Press and hold the A. ME button for at least 2
seconds.
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band.
They will be stored into presets 1 to 6 buttons in
order of signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Storing into Direct Access Preset
(D.A.P.) Band
A combination of radio stations in any band (up to
6 stations) can be manually preset into the D.A.P.
band.
1 Press the "F" button to illuminate the FUNC
(Function) indicator.
2 Press the D.A.P. button until the D.A.P. indicator
appears.
Press the BAND button to select FM or AM.
The selected band will be displayed.
To memorize stations onto the D.A.P. band,
follow the steps for the automatic or Manual
Storing of Station Presets section above.
NOTE
This function can be used together with the Automatic
Memory Preset.
To cancel the D.A.P. mode, press the D.A.P.
button. The D.A.P. indicator will turn off.
3 Press the "F" button to activate the normal
mode. The FUNC indicator will turn off.
NOTE
Setting should be performed within 5 seconds after the
"F" button is pressed. The unit will automatically return
to the normal mode 5 seconds after pressing the "F"
button.
Tuning to Preset Stations
1 Press the SOURCE button to select the radio
mode.
2 Press the BAND button repeatedly until the
desired band is displayed.
To select the D.A.P. band, press the D.A.P. button
until the D.A.P. indicator appears in the display.
3 Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.

   Find Your Products By Category