Acoustic Research Headphones AW-D510 User Manual

0

Out of 0 Ratings

Owner's of the Acoustic Research Headphones AW-D510 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 12
 
6
1. Press the power button on the transmitter’s top
panel to turn the transmitter on.
Note: Make sure the right input is selected—if it isn’t,
press the input select button repeatedly until the LED
above the correct input is lit.
2. Press the power button on the right headphone to
turn the headphones on.
3. Switch on the audio source (TV, DVD, CD player,
etc.) to which the transmitter is connected. If your
audio source is a DVD or CD player, start a disc.
4. The headphones and transmitter should automatically lock onto each other for
wireless transmission.
If they don’t tune automatically, or if you experience interference in the
transmission, press the ch select button on the top of the transmitter until you
nd the clearest channel. The headphones beep when they lock onto a new
channel. If you don’t hear a beep, the current channe might be in use by other
2.4GHz devices (such as a wireless router). Push the ch select button again to try
another channel. There are 8 channel frequencies available.
5. Adjust the volume using the volume up and down buttons on the left earphone.
Turning the Headphones Off
To turn the headphones off: Press and hold the power button on the headphones
for 1 second. Don't forget to switch off the transmitter too!
power
button
Using your Headphones

   Find Your Products By Category