Acoustic Research Headphones AW-D510 User Manual

0

Out of 0 Ratings

Owner's of the Acoustic Research Headphones AW-D510 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 12
 
3
2. Charge the headset.
Unhook the charging cable on the transmitter’s
back panel.
Transmitter (back panel)
OPTICALCOAXIALDC IN LINE INOPTICALCOAXIALDC IN LINE IN
Charging cable
hook
Plug the end of the charging cable into the
recharging jack on the right headphone.
While the headphones are charging, the LED on
the left headphone remains red. This LED turns off
when the headphones are fully charged.
Note: To get the most from your headphones’ battery,
make sure you let the headphones charge completely
before you used them for the rst time.
Note: Make sure the transmitter is off while you charge
the headphones.
Connection to the Audio Source
The 2.4GHz wireless transmitter supports Dolby Digital 5.1 encoding through
the digital optical and digital coaxial inputs. It also offers an analog connection
through the LINE IN jack.
Connecting to a digital optical or digital coaxial output
1. Plug the digital optical or digital coaxial cable
into the corresponding output jack on your audio
source.
2. Connect the other end of the digital optical or
digital coaxial cable to the OPTICAL or COAXIAL
jack on the transmitter's back panel.
Transmitter (back panel)
OPTICALCOAXIALDC IN LINE INOPTICALCOAXIALDC IN LINE IN
Digital
optical
cable
—OR—
Digital
coaxial
cable
Optical jack on
audio source
Digital coaxial jack
on audio source

   Find Your Products By Category