Transition Networks Network Card SPS-1872-CC User Manual

0

Out of 0 Ratings

Owner's of the Transition Networks Network Card SPS-1872-CC gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 7
 
6
24-Hour Technical Support: 800-260-1312 -- International: 952-941-7600
SPS-1872-xx
GND
-
+
-
+
___
___
___
___
___
___
___
___
123
INPUT
POWER:
123
SPS-1872-x
x
External Power Source
Installation -- Continued
Supplying Power to the SPS-1872-xx
CAUTION: The power source MUST BE TURNED OFF when connecting it to
the SPS-1872-xx external power supply. Failure to observe this caution could
result in damage to, and subsequent failure of, the SPS-1872-xx and any attached
device.
To supply power to the SPS-1872-xx:
1. Ensure that external power source is truned OFF.
2. Connect the positive (+) terminal of the power source to the positive
terminal on the SPS-1872-xx (marked with a “3”). Turn the terminal
screw clockwise to secure it.
3. Connect the negative (-) terminal of the power source to the negative
terminal on the SPS-1872-xx (marked with a “2”). Turn the terminal
screw clockwise to secure.
4. Connect the ground terminal of the power source to the ground terminal
on the SPS-1872-xx (marked with a “1”). Turn the terminal screw
clockwise to secure.
5. Power on the external power source.
WARNING: The SPS1872 must be attached to a limited current circuit with a
non-hazardous energy level of less than 240VA and be located in a restricted
access area. Failure to observe this warning could result in an electrical shock.
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.
7
Maintenance
Replacing the Fuse
CAUTION: The external power source MUST BE POWERED OFF when
replacing the fuse to the SPS-1872-xx external power supply. Failure to observe
this caution could result in damage to, and subsequent failure of, the SPS-1872-
xx and any attached device.
NOTE: Replace the fuse only with one of the same size and rating.
To replace the fuse in the SPS-1872-xx external power supply:
1. Ensure that the external power source is turned OFF.
2. Remove and retain the four (4) screws that secure the cover to the SPS-
1872-xx external power supply.
3. Carefully lift the cover from the SPS-1872-xx.
4. Locate the fuse on the SPS-1872-xx (see the picture below).
5. Carefully remove the fuse the from the fuse holder.
6. Install a same size and rating replacement fuse in the fuse holder.
7. Carefully slide the cover onto the SPS-1872-xx.
8. Replace the four (4) retained screws that secure the cover to the SPS-
1872-xx.
9. Power on the external power source.

   Find Your Products By Category