Canon Camcorder IXUS User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder IXUS gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 103
 
Troubleshooting
image is blurred.
Press the shutter button halfway to focus on the subject, then press fully to shoot
(p. 24).
Shoot the subject within the focusing distance (p. 201).
Set the [AF-assist Beam] to [On] (p. 171).
Confirm that functions which you do not intend to use (macro, etc.) are not set.
Shoot using the focus lock or AF lock (pp. 96, 99).
Even when you press the shutter button halfway, the AF frame does not
appear, and the camera does not focus.
If you center onthe light and dark contrasting area of the subject and push the shutter
button halfway, or repeatedly push theshutter button halfway, the AF frame will appear
and the camera will focus.
Subject is too dark.
Set the flash to ,_(p. 85).
Correct the brightness with exposure compensation (p. 85).
Adjust the image with i-Contrast (pp. 89, 149).
Use spot metering or AE Lock to shoot (pp. 101,102).
Subject is too bright (overexposed).
Set the flash to _ (p. 54).
Correct the brightness with exposure compensation (p. 85).
Use spot metering or AE Lock to shoot (pp. 101,102).
Reduce the light illuminating the subject.
image is dark even though the flash fired (p. 27).
Shoot within anappropriate distance for flash photography (p. 85).
Increase the ISO speed (p. 88).
mmage taken using the flash is too bright (overexposed).
Shoot within anappropriate distance for flash photography (p. 85).
Set the flash to _) (p. 54).
White dots appear on the image when shooting with the flash.
Light from the flash has reflected off dust particles or other objects in the air.
mmage appears rough or grainy.
Shoot with the ISO speed on alower setting (p. 88).
Depending on the Shooting mode, when shooting in a high ISO speed the image may
appear rough or grainy (pp. 65, 66).
Eyes appear red (p. 104).
Setthe [Red-Eye Lamp] to [On](p. 171). When shooting with the flash, the tamp(on the
front of the camera) lights (p. 42), and for approximately 1 second while the camera is
reducing red-eye, it is not possible to shoot. Itis more effective ifthe subject is looking
directly at the lamp. Even better results can be obtained by increasing the lighting in
indoor settings or approaching closer to the subject.
Correct images with red-eye correction (p. 150).
182

   Find Your Products By Category