Brinkmann Charcoal Grill 810-8750-S User Manual

0

Out of 0 Ratings

Owner's of the Brinkmann Charcoal Grill 810-8750-S gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 88
 
5
CAUTION: Some parts may
contain sharp edges. Wear
protective gloves if necessary.
WARNING: Only use the specific
orifice designated for your grill
model. Always double check the
millimeter size on the side of the
orifice tip prior to installation. Use of
any other orifice could lead to
personal injury, property damage
and void your grill warranty.
Note: Make sure all control
knobs are in the off
position, LP tank valve is
closed and tank is
disconnected from
regulator and removed
from grill.
Step 1
Hold the gas manifold connection with
an adjustable wrench and use a 3/4”
wrench to undo LP hose connection
from gas manifold.
Step 2
Attach 10’ hose to gas manifold.
Tighten connection carefully using
two wrenches. Take the end of the 10’
hose and place it through the cart
back panel exit.
Step 3
Open hood and remove warming
rack, cooking grills and heat shields.
Set aside for later use.
CONVERSION
INSTRUCTIONS
810-8905-S & 810-8907-S
Warming Rack
Cooking Grills
Heat Shields
10’ Natural Gas Hose
Gas Manifold
Connection
Back Panel Exit

   Find Your Products By Category