Alpine Stereo Amplifier cda-9805 User Manual

4.3

Out of 9 Ratings

Owner's of the Alpine Stereo Amplifier cda-9805 gave it a score of 4.3 out of 5. Here's how the scores stacked up:

  • Reliability

    4.55 out of 5

  • Durability

    4.5 out of 5

  • Maintenance

    4.0 out of 5

  • Performance

    4.57 out of 5

  • Ease of Use

    3.75 out of 5
of 41
 
12-EN
SETUP Operation
BAND/TEL.
g
f
F/SETUP
SOURCE/POWER
Setting the External Input Defeat
Mode
When inputting external devices to this unit, turning
DEFEAT ON will bypass BASS,TREBLE and MX, i.e.,
sound for external devices is output at the default
setting.
1 Press and hold the F/SETUP button for at least 3
seconds.
2 Press the f or g button to select "INT."
3 Press the BAND/TEL. button to toggle the mode
between INT ON and INT OFF.
When using Initial mode, set this to ON.
When the Initial mode is not selected, set this to OFF.
4 Press the F/SETUP button to return to normal mode.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) or Versatile
Link Terminal (KCA-410C) to this component.
1 Press and hold the F/SETUP button for at least 3
seconds.
2 Press the f or g button to select “AUX.”
3 Press the BAND/TEL. button to toggle the mode
between AUX ON and AUX OFF.
NOTES
• The initial setting at the factory is AUX OFF.
• You can set the AUX mode display by pressing the
g or f button after AUX ON is set, select the AUX
mode display setting, and then press the BAND button.
• When connecting the KCA-410C, you can set two AUX mode
displays.
4 Press the F/SETUP button to return to normal mode.
5 To adjust the volume, etc., first press the SOURCE/
POWER button and select the AUX mode, then make
the necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you can
connect two external inputs. To select the mode, press the BAND/
TEL. button on the unit.
Turning Mute Mode On/Off
If a device having the interrupt feature is connected,
audio will be automatically muted whenever the interrupt
signal is received from the device. This function can be
turned ON or OFF from the head unit by following
procedure below.
1 Press and hold the F/SETUP button for at least 3
seconds.
2 Press the f or g button to select the MUTE
mode.
3 Press the BAND/TEL. button to turn on or off the
MUTE mode.
Each press toggles between the MUTE ON and OFF
modes.
NOTE
The initial setting at the factory is “MUTE ON.”
4 Press the F/SETUP button again to return to normal
operation.

   Find Your Products By Category