0

Out of 0 Ratings

Owner's of the 3Com Switch LANplex 6000 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 16
 
TRSM Installation
9
Figure 6
Guiding an TRSM Module into a LANplex 6004
6
Inject the TRSM into the chassis.
If the system is powered on, when the
Power/Unseat
LED on the
panel’s faceplate is yellow, inject the TRSM into the chassis by grabbing
both ejector/injector handles and simultaneously push them inward. See
Figure 7.
If the system is not powered on, once you feel a slight resistance, inject
the TRSM into the chassis.
7
Relocate the inject handles back to their center position by gently pushing
them inward. See Figure 7.
This locks the TRSM into the chassis. The
Power/Unseat
LED lights green
when the TRSM is seated.
LMM in slot 1
TRSM
TRSM