3Com Network Router 3CRWDR200A-75 User Manual

0

Out of 0 Ratings

Owner's of the 3Com Network Router 3CRWDR200A-75 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 144
 
62 CHAPTER 5: ROUTER CONFIGURATION
Figure 39 Advanced Wireless Settings Screen
Authentication Type The default is set to Auto (Default), allows
either Open System or Shared Key authentication to be used. With Open
System authentication, the sender and the recipient do NOT use a WEP
key for authentication. With Shared Key authentication, the sender and
recipient use a WEP key for authentication.
Basic Rate The Basic Rate setting is not actually one rate of
transmission but a series of rates at which the Router can transmit. The
Router will advertise its Basic Rate to the other wireless devices in your
network, so they know which rates will be used. The Router will also
advertise that it will automatically select the best rate for transmission.
The default setting is Default, when the Router can transmit at all
standard wireless rates (1-2Mbps, 5.5Mbps, 11Mbps, 18Mbps, and
24Mbps). Other options are 1-2Mbps, for use with older wireless
technology, and All, when the Router can transmit at all wireless rates.
The Basic Rate is not the actual rate of data transmission. If you want to
specify the Router's rate of data transmission, configure the Transmission
Rate setting.
Transmission Rate The rate of data transmission should be set
depending on the speed of your wireless network. You can select from a
range of transmission speeds, or you can select Auto (Default) to have the
Router automatically use the fastest possible data rate and enable the

   Find Your Products By Category